Why scalpers need different infrastructure
Scalping strategies open and close positions inside seconds — sometimes inside a single tick. A 50ms latency edge against a competing scalper translates directly to better fills, fewer requotes, and lower slippage. Standard cloud VPS providers tune for throughput (network bandwidth, disk I/O); scalping VPS providers tune for latency tail (P99 round-trip, jitter, kernel scheduling).
How DigiRDP tunes scalping plans
Three differences from a standard Forex VPS plan: NIC interrupt affinity is pinned to dedicated cores so packet processing never queues, Windows power plan is locked to "High Performance" (no C-state transitions), and the network path to top brokers is monitored 24/7 — if jitter exceeds 0.5ms we route around the bad hop automatically. Hardware is the same NVMe + dedicated-vCPU recipe; the difference is the kernel and network tuning.
Pick your location
Each location has its own pricing tiers — RAM, vCPU, storage, full plan list with "Order Now" buttons.
New York Cloud VPS
NY4-zone · NIC pinning · sub-1ms US-broker fills
UK Cloud VPS
LD4 London · NIC pinning · best for European-session scalpers
Germany Cloud VPS
Frankfurt · low jitter · DAX scalping ready
Singapore Cloud VPS
Singapore · Asian-session scalping · sub-2ms TY3
Indian Cloud VPS
Mumbai · low latency to Indian + Asian brokers
Netherlands Cloud VPS
Amsterdam · NVMe SSD · 1 Gbps unmetered
What you get
Same hardware backbone as our flagship plans, tuned for this workload.
Sub-1ms order execution
Same-data-centre placement at LD4, NY4, TY3 — measured P50 ping ~0.4ms.
NIC pinned to dedicated core
Packet interrupts handled on a CPU core that never sleeps.
Windows tuned for low jitter
High-performance power plan, indexing off, telemetry off, GC tuned.
Auto-route around bad hops
If broker path jitter exceeds 0.5ms, we re-route in seconds.
99.95% uptime SLA
Tighter than standard VPS plans. Service credit if we miss it.
Trader-desk priority queue
Scalping plans get priority support — first response under 2 minutes.
Setup & Migration in 6 Steps
Most clients are up and running in under 15 minutes.
- 1 Order a scalping plan in the data centre that matches your broker (LD4 for ECN majors, NY4 for US brokers, TY3 for Asian session).
- 2 Receive RDP credentials by email and connect over Remote Desktop.
- 3 MT4 / MT5 / cTrader is pre-installed and pre-tuned. Open, log in to broker.
- 4 Copy your scalping EA into the Data Folder, attach to chart, enable AutoTrading.
- 5 Verify ping to broker on the desktop ping widget — should display under 1ms.
- 6 Disconnect RDP. Your scalping system is now running 24/7 with the lowest latency we can buy.
Frequently asked questions
What makes a scalping VPS different from a regular Forex VPS?
What latency can I expect to my broker?
Will my scalping EA actually fill better?
Do you support news trading and martingale strategies?
How much RAM does a scalping setup need?
Is the 99.95% uptime SLA real?
Can I monitor my latency live?
Can I switch data centres later if my broker moves?
What payment methods are accepted?
Is there a money-back guarantee?
Related
Ready to get started?
Scalping VPS — provisioned in 10 minutes, 24-hour money-back guarantee, accept crypto / PayPal / INR.